vpn도 cisco 어떤 장비를 사용하는냐에 따라 약간 설정이 다른거 아닙니까
일단...라우터로 vpn 구성시..
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
enable secret 5 $1$v5OP$mPuiEQn8ULa8hVMYVOV1D.
enable password ww
!
ip subnet-zero
!
cns event-service server
!
!--- IKE configuration
crypto isakmp policy 1
hash md5
authentication pre-share
crypto isakmp key cisco123 address 0.0.0.0
crypto isakmp client configuration address-pool local ourpool
!
!--- IPSec configuration
crypto ipsec transform-set trans1 esp-des esp-md5-hmac
!
crypto dynamic-map dynmap 10
set transform-set trans1
!
crypto map intmap client configuration address initiate
crypto map intmap client configuration address respond
crypto map intmap 10 ipsec-isakmp dynamic dynmap
!
interface Ethernet0
ip address 201.70.32.101 255.255.255.0
no ip directed-broadcast
ip nat outside
no ip route-cache
no ip mroute-cache
crypto map intmap
!
interface Serial1
ip address 10.2.2.1 255.255.255.0
no ip directed-broadcast
ip nat inside
!
ip local pool ourpool 10.2.1.1 10.2.1.254
ip nat pool outsidepool 201.70.32.150 201.70.32.160 netmask 255.255.255.0
!--- Except the private network to private network traffic
!--- from the NAT process.
ip nat inside source route-map nonat pool outsidepool
ip classless
ip route 0.0.0.0 0.0.0.0 201.70.32.1
no ip http server
!--- Except the private network to private network traffic
!--- from the NAT process.
access-list 101 deny ip 10.2.2.0 0.0.0.255 10.2.1.0 0.0.0.255
access-list 101 permit ip 10.2.2.0 0.0.0.255 any
route-map nonat permit 10
match ip address 101
!
line con 0
transport input none
line aux 0
line vty 0 4
password ww
login
!
end
PIX 장비에서 vPN
PIX Version 6.2.1
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
fixup protocol ftp 21
fixup protocol http 80
fixup protocol smtp 25
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol sqlnet 1521
names
!--- ACL to bypass the NAT (note that you have to know the
!--- IP address of the Client, subnet 65.10.10.0/24 in this case).
access-list 103 permit ip 10.0.0.0 255.0.0.0 65.10.10.0 255.255.255.0
pager lines 24
no logging timestamp
no logging standby
logging console debugging
no logging monitor
no logging buffered
no logging trap
logging facility 20
logging queue 512
interface ethernet0 10baset
interface ethernet1 auto
mtu outside 1500
mtu inside 1500
ip address outside 192.68.0.10 255.255.255.0
ip address inside 10.1.1.3 255.255.255.0
no failover
failover timeout 0:00:00
failover ip address outside 0.0.0.0
failover ip address inside 0.0.0.0
arp timeout 14400
global (outside) 1 192.68.0.11-192.168.0.15 netmask 255.255.255.0
!--- Binding ACL 103 to the NAT statement to avoid NAT on the IPSec packet.
nat (inside) 0 access-list 103
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 192.68.0.50 10.1.1.50 netmask 255.255.255.255 0 0
conduit permit icmp any any
no rip outside passive
no rip outside default
no rip inside passive
no rip inside default
route outside 0.0.0.0 0.0.0.0 192.68.0.1 1
route inside 10.2.2.0 255.255.255.0 10.1.1.1 1
timeout xlate 3:00:00 conn 1:00:00 half-closed 0:10:00 udp 0:02:00
timeout rpc 0:10:00 h323 0:05:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
!--- The sysopt ipsec pl-compatible command
!--- avoids conduit on the IPSec encrypted traffic.
!--- This command should be used if you are not using
!--- the nat 0 access-list command.
sysopt ipsec pl-compatible
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map interface outside
isakmp enable outside
isakmp key cisco123 address 0.0.0.0 netmask 0.0.0.0
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 1
isakmp policy 10 lifetime 1000
telnet timeout 5
terminal width 80
Cryptochecksum:c687aa0afb1dd03abce04c31566b5c52
: end
시스코 홈페이지에서참조하세요
